************ 1962 Nicosia, Cyprus Airport **************

by Gergely Kosa, backdated AFCAD by Nikko Yaginuma, hosted at CalClassics - tgibson@sunstroke.sdsu.edu

Version 1, 3/2009, for FS2004 only.

NOTE: This file, AI traffic, and lots of classic airliners can be downloaded free from Tom Gibson's California Classics at - http://www.calclassic.com/ 

This simple scenery includes the Nicosia, Cyprus airport as it was about 1962.  It is a simple scenery including a terminal that is an approximation, made from library objects.  Its code is LCNC.

Suggested Additions:

If you do not have another airport texture addon, I suggest that you download and install airland1.zip from AVSIM or elsewhere.  It increases frame rates while adding detail to the concrete and asphalt aprons, taxiways, and runways.

AI propliner and GA traffic matching this scenery is available separately from www.calclassic.com (AI Aircraft page).

Credits:

Thanks to Gergely Kosa for creating the basic scenery, and for allowing use to redistribute it.

Airport surfaces created with AFCAD2, by Lee Swordy - thanks Lee!

INSTALLATION

1.  Quit FS2004 if running.

2.  Unzip this Nicosia1962.zip file archive by double clicking it.  You will find 
this text file and a folder called Nicosia 1962.

3.  Copy the Nicosia 1962 folder into your FS2004/Addon Scenery folder.

4. Start FS2004, and go to the Settings/Scenery Library choice on the 
opening screen.  If you are currently flying, press Escape (Esc) and then End 
Flight to get to this screen. Look at the top portion of the list.  If there is no 
Nicosia 1962 area listed there, click on the Add Area button.  Double 
click the ADDON SCENERY folder.  Click the Nicosia 1962 folder once.  Click OK.

5.  If you have any addon scenery for Nicosia airport, jetways, etc. uncheck that scenery's 
Active box to inactivate it.

6.    Click OK.  Quit and restart FS.

7.  If at the main screen, choose Create Flight at the left, select desired items, and
press Fly Now.  Choose Options/Settings/Display.  Under Scenery Objects set the
Scenery Density to Dense or less (setting to Very or Extremely Dense will display modern
jetways at default airports).  Also, set the Autogen Density to Dense or less 
(any higher may display telephone poles in odd places at the airports); this will also 
simulate the less dense cities found in the era.  Click OK.

10.  If you later want to fly in the modern era, just go into the Scenery Library 
(Settings/Scenery Library) and click on the Enabled box next to the 
Nicosia 1962 entry until the red check mark is removed to deactivate the 
1962 scenery (do not deactivate the Static Objects Library layer).You must restart 
FS after you do all of this.

Reverse this process again to go back to 1962.

NOTE: This file, AI Traffic for this scenery (and the world), and lots of classic 
airliners can be downloaded free from Tom Gibson's Classic Airliner web site at - 
http://www.calclassic.com
**************************************************************************
Now the legal stuff:

COPYRIGHT 2009 BY Gergely Kosa AND Nikko Yaginuma, ALL RIGHTS RESERVED

THIS SCENERY IS THE PROPERTY OF THE AUTHORS, AND CANNOT BE 
RE-SOLD OR PACKAGED WITH ANY PRODUCT FOR SALE, WITHOUT THE 
EXPRESS WRITTEN PERMISSION OF THE AUTHORS.  THIS IS FREEWARE!!

THE AUTHORS ARE NOT LIABLE FOR ANY DAMAGE THAT YOU MIGHT 
INCUR AS A RESULT OF USING THESE PRODUCTS.  YOU ASSUME THE RISK 
OF USE.
